Setcrete Universal Floor Levelling Compound 20kg T0601E5A

An easy to use floor levelling compound – just add water in correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes.

• The product can be applied in one application to depths between 3mm and 6mm
• Setcrete™ Universal takes approximately 24 hours at to fully dry, so that floor coverings can be laid on top. However, after 3 hours it is hard enough for you to walk on.
• Setcrete™ Universal is suitable to use over a wide range of absorbent sub floors, which should first be coated with Setcrete™ Acrylic Primer diluted in a ratio of 1 part primer to 4 parts water
• For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete™ Acrylic Primer
• The working time for use is approximately 15 – 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature and humidity. Do not mix more than one bag at a time
• Setcrete™ Universal is not suitable for use when bonding solid wood flooring. All other Setcrete™ floor levelling compounds are suitable for installation of this type of flooring
• For further information and technical advice regarding the use of Setcrete™ Universal, please email the Technical Services Department - contact@setcrete.co.uk
• Always read the instructions